Building permits in 91364

EPLAN: Interior First Floor tenant improvement to (e) bankDemolition of existing occupied space, including non-structural interior walls, millwork, finishes, lighting, and ceilings.New full-height partitions.New flooring and wall finishes in selected areas.Modifications to existing ceilings at new partitions.No change to use or occupancy.No change to parking counts.

ePlan New 3 story SFD with a attached garageS (1: one car and 1: two car garage). To be fully sprinklered NFPA 13D

eplan: Two story addition (substantially connected via covered patio) of attached garage on 1st floor and attached Accessory Dwelling Unit per LAMC 12.22 A.33 (c) and (e) on 2nd floor

CONVERT 391 SF PORTION OF (E) SFD TO JADU PER GC 66323(a)(1) AND AND 66333.

EPLAN: CONVERSION OF (E) DETACHED GARAGE WITH ADDITIONS TO CREATE A (N) 2-STORY ACCESSORY DWELLING UNIT TO COMPLY WITH LAMC12.22A.33(b)(1) WITH ATTACHED STORAGE (EXTERIOR ACCESS ONLY) PER ENGINEERING

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 150 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.Remove existing roof tiles, apply new underlayment and reset roof tiles (Cool roof compliance is not required)

eplan NEW RETAINING WALL

CONVERT (E) ATTACHED GARAGE TO JUNIOR ACCESSORY DWELLING UNIT PER GCS 66323(a)(1)and 66333.

4 bathroom(s).Bathroom remodel for residential buildings (no structural changes).Kitchen remodel for residential buildings (no structural changes).

(17) Window change-out (same size & type) for residential buildings. Dual glazing, labeled and certified byNational Fenestration Rating Council (NFRC), is required for doors and windows replaced in all residentialbuildings, three stories or less, per Section 150.2(b) 1B of Title 24.

existing swmming pool remodel and add new spa, baja using standard plan 268

ePlan Temporary shoring

Chimney repair for residential buildings (per City standard details).

REMODEL EXISTING SWIMMING POOL. RESHAPE AND ADD SPA. WORK PER STANDARD PLAN # 265 AND ENGINEERING DETAILS.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over new solid sheathing 41 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 13 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.5 window(s). Window and door change-out (same size & type) for residential buildings. Dual glazing, labeled and certified by National Fenestration Rating Council (NFRC), is required for doors and windows replaced in all residential buildings, three stories or less, per Title 24, Part 6, Section 150.2(b)1B.2 bathroom(s).Bathroom remodel for residential buildings (no structural changes).Kitchen remodel for residential buildings (no structural changes).

Kitchen remodel for residential buildings (no structural changes).

NEW 16'-3" X 12'-7" DETACHED COVERED PATIO. WORK PER ENGINEER.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 41 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over new solid sheathing 22 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.