Building permits in 91307

2-STORY ADDT'N (IRR SHAPED) TO (E) 1-STORY SFD (NFPA-13D FIRE SPRINKLERS THROUGHOUT) **ePlan**

ADDITION TO EXISTING SINGLE FAMILY DWELLING OF A JUNIOR ACCESSORY DWELLING PER GC 66323(a)(1) AND 66333 AND CONVERT PORTING OF SINGLE FAMILY DWELLING INTO AN ACCESSORY DWELLING UNIT PER GC 66323(a)(1)

CONVERSION OF (E) DETACHED GARAGE WITH ADDITION INTO AN ACCESSORY DWELLING UNIT TO COMPLY WITH LAMC 12.22 A.33(b)(1) WITH ADDITION TO CREATE AN ATTACHED 2ND DWELLING UNIT PER SB9 TWO-UNIT DEVELOPMENT PER ENGINEERING. NFPA-13D FIRE SPRINKLER THRU-OUT

CONVERT (E) ATTACHED GARAGE TO A (N) ACCESSORY DWELLING UNIT WITH ADDITION PER LAMC 12.22 A.33(c) AND (e). WORK PER ENGINEER.

Remove existing roof tiles, apply new underlayment and reset roof tiles (Cool roof compliance is not required)

CONVERT (E) ATTACHED GARAGE TO JUNIOR ACCESSORY DWELLING UNIT PER GCS 66323(a)(1)and 66333."COMPLY WITH DEPARTMENT ORDER effective date 06/04/2026. PERMIT WILL EXPIRE 30 DAYS FROM ISSUANCE DATE"

Addition (11'-1x 12'-7") New Front Porch to (E) Two Story SFD ,

Kitchen remodel for residential buildings (no structural changes).

INTERIOR REMODEL TO THE (E) GARAGE. INSTALL CEILING AND A WATER HEATER ROOM. ALL WORK PER WFPP.

2 bathroom(s).Bathroom remodel for residential buildings (no structural changes).Kitchen remodel for residential buildings (no structural changes).

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over new solid sheathing 25 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.1 door(s). Window and door change-out (same size & type) for residential buildings. Dual glazing, labeled and certified by National Fenestration Rating Council (NFRC), is required for doors and windows replaced in all residential buildings, three stories or less, per Title 24, Part 6, Section 150.2(b)1B.Replace drywall (no new walls added) for single family dwellings and duplexes only.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 41 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Remove existing roof tiles, apply new underlayment and reset roof tiles (Cool roof compliance is not required)

1 bathroom(s).Bathroom remodel for residential buildings (no structural changes).

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over new solid sheathing 20 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 30 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 30 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 30 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 27 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 27 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.