Building permits in 91306

NEW TWO-STORY BUILDIING WITH AN ATTACHED PORCH, CONTAINING TWO ACCESSORY DWELLING UNITS PER GC 66323(a)(4), WITH ONE LOCATED ON EACH FLOOR.

EPLAN CONVERT (E) 20' X 20' ATTACHED GARAGE AND ADD 11'-1" X 23'-4" AT 1ST FLOOR & 20' X 20' AT 2ND FLOOR TO CREATE ATTACHED ACCESSORY DWELLING UNIT per LAMC12.22A.33(c) and(e). ALL WORK PER ENGINEERING.

Permit previously unpermitted existing one-story, detached ADU built prior to Jan 1, 2020 per AB 2533 (P/BC 2026-161)

Fire damage repair for residential buildings only (maximum 10% of replacement cost of building).

ePlan: Remodeling and addition to rear of (E) Single Family Dwelling w/ attached garage

ADDITION AND CONVERSION OF DETACHED GARAGE TO (N) ADU per LAMC 12.22 A.33(b)(1),(c),(d),(h) and (k). WORK PER WFPP.

Window (151 ) and door (5) change-out (same size & type) for residential buildings. Dual glazing, labeled and certified by National Fenestration Rating Council (NFRC), is required for doors and windows replaced in all residential buildings, three stories or less, per Title 24, Part 6, Section 150.2(b) 1B.

REMODEL AND ADDITION TO THE (E) SINGLE FAMILY DWELLING. CONVERT A PORTION OF THE (E) SFD INTO A SECOND DWELLING UNIT PER SB9, CREATING A DUPLEX. CONVERT THE(E) ATTACHED GARAGE TO ACCESSORY DWELLIN UNIT PERLAMC 12.22 A.33 (c) and (e) .DUPLEX: UNIT 2-3ADU: UNIT 1

IRR. 14'-6" X 27'-10"ADDITION & REMODEL TO (E) SFD PER ENGINEERING

ePlan: Convert attached garage to an ADU per GC 66323(a)(1) in (E) 1-story SFD. All work per WFPP.

Install insulation in walls / floor for single family dwellings and duplex only.Replace drywall (no new walls added) for single family dwellings and duplexes only.Replacement of damaged framing members (less than 10% of replacement cost of building) for houses andduplexes (not including decks).2 Window change-out (same size & type) for residential buildings. Dual glazing, labeled and certified byNational Fenestration Rating Council (NFRC), is required for doors and windows replaced in all residentialbuildings, three stories or less, per Section 150.2(b) 1B of Title 24.Re-roof with Class A or B material weighing less than 6 pounds per sq. ft. over new solid sheathing___4___Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). Forresidential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by CoolRoof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6,Section 141(b) 2B.

1 bathroom(s).Bathroom remodel for residential buildings (no structural changes).Kitchen remodel for residential buildings (no structural changes).

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over new solid sheathing 30 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

6 Window change-out (same size & type) for residential buildings. Dual glazing, labeled and certified by National Fenestration Rating Council (NFRC), is required for doors and windows replaced in all residential buildings, three stories or less, per Section 150.2(b) 1B of Title 24.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over new solid sheathing 27 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

ePlan: BALCONY REPAIR TO (E) CONDO UNIT 214

CHANGE OF USE FROM (E) MASSAGE PLACE TO (N) BARBER

REMODEL TO (E) SFD. INFILL WINDOWS, REPLACE WINDOWS AND DOORS PER PLANS. REMODEL BATHROOM AND LAUNDRY ROOM. "COMPLY WITH DEPARTMENT ORDER effective date05/11/2026. PERMIT WILL EXPIRE 30 DAYS FROM ISSUANCE DATE".

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 34 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 33 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.