Building permits in 90044

ePlanCONSTRUCTION OF 2 DETACHED ADUs PER LAMC 12.22 A.33 (c).

ePlan: Conversion and addition to detached garage to ADU per 66323(a)(2). Design per engineer.

(N) DETACHED ADU PER GC 66323(a)(2) @ REAR OF LOT

NEW 818 SQ.FT. 2ND FLOOR ADDITION TO THE MAIN HOUSE.

ADDITION TO AND CONVERT DETACHED GARAGE TO ACCESSORY DWELLING UNIT PER GCS 66323(A)(2)

EPLAN: Addition and Conversion of (E) Garage and storage room to (N) Accessory Dwelling Unit and storage per GC 66323(a)(2) COMPLY WITH DEPARTMENT ORDER effective date 05/22/2023. PERMIT WILL EXPIRE 30 DAYS FROM ISSUANCE DATE. CEIS Case Number is 986167.

ePLAN. CONVERSION OF (E) ATTACHED GARAGE TO (N) ACCESSORY DWELLING UNIT PER STATE LAW (GC 66323(a)(3)). IN EXISTING APARTMENT BUILDING

Eplan: Soft-Story seismic retrofit per LABC Chapter 93: Install (1) Special Steel Cantilever Column

VOLUNTARY EARTHQUAKE HAZARD REDUCTION PER ENGINEER DETIALS/DESIGN. SINGLE STORY APARTMENT.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft.over existing solid sheathing 23 Squares. Class A roof covering is required withinVery High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement >50% of the total roof area, apply Cool Roof Product labeled and certified by Cool RoofRating Council (CRRC). Cool Roof may be required for non-residential buildings perTitle 24, Part 6, Section 141.0(b)2B.

Eplan. Remodel of 1 story duplex with attached storage. Scope includes new bathrooms and conversion of storage to new bedroom.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over new solid sheathing 24 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.Water damage, termite damage/ dry rot repair less than 10% of replacement cost of residential buildings.Remove existing roof tiles, apply new underlayment and reset roof tiles (Cool roof compliance is not required)

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing __15.09____Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Bathroom remodel for residential buildings (no structural changes). ELECTRICAL AND PLUMBING INCLUDED

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 30 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 22 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over new solid sheathing 13 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 18 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 14 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over existing solid sheathing 11 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.