Building permits in 90018

EPLAN: ADDITION AND CONVERSION OF (E) REAR SINGLE FAMILY DWELLING TO ACCESSORY DWELLING UNIT PER LAMC 12.22A.33(B)(1),(C),(D),(H) AND (K)

New 2-story 2-unit ADU building per GC Section 66323(a)(4).

New 2-story 2-unit ADU building per GC Section 66323(a)(4).

Eplan. First and second floor addition to create an ADU per GC 66323(a)(2) to an (e) garage.

(1 of 2) CONVERSION OF EXISTING DETACHED GARAGE AND NEW ADDITION TO CREATE NEW ADU PER ORDINANCE.

Fiber Cement siding over solid sheathing with an approved water-resistive barrier per valid ICC Evaluation Report # 2290 on exterior walls at 5 feet or more from property lines for residential buildings. (Applicant to provide a copy of the report to inspector).

SUPPLEMENTAL PERMIT TO 26016-10000-11904. REVISE FLOOR PLANS AND ENGINEER OF RECORD. INCLUDE MECHANICAL, ELECTRICAL, AND PLUMBING FEES.

Exterior and interior remodel to (E) apartment, add bedroom to each unit

Eplan: Soft-Story seismic retrofit per LABC Chapter 93: Soft story retrofit at parking garage with two new special steel cantilever columns with grade beam

VOLUNTARY UPGRADE TO (E) FOUNDATION PER ENGINEERING DETAIL, AND STANDARD PLAN #1. REPLACE 132' OF FOUNDATION, INSTALL 7 PIER AND POST

Install insulation in walls / floor for single family dwellings and duplex only.

(2 OF 2) PROPOSED LAUNDRY ROOM ADDITION TO MAIN HOUSE.

Re-roof with Class A or B material weighing less than 6 pounds per sq. ft. over existing solid sheathing ___25___Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b) 2B.

Partial Seismic Retrofit and Anchor to (E) Foundation Per Standard Plan #1 and Partial Sister Foundation Per Engineered Detail

Re-roof with Class A or B material weighing less than 6 pounds per sq. ft. over existing solid sheathing___12___Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone(VHFHSZ).For residential roof replacement>50% of the total roof area, apply Cool Roof Product labeled and certified byCool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part6, Section 141(b) 2B.DETACHED GARAGE INCLUDED

Re-roof with Class A or B material weighing less than 6 pounds per sq. ft. over existing solid sheathing ____27__Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b) 2B. Including detached garage.

1 bathroom(s).Bathroom remodel for residential buildings (no structural changes).

Re-roof with Class A or B material weighing less than 6 pounds per sq. ft. over existing solid sheathing___22___Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone(VHFHSZ).For residential roof replacement>50% of the total roof area, apply Cool Roof Product labeled and certified byCool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part6, Section 141(b) 2B.

(1) Kitchen and (1) Bathroom remodel for residential buildings (no structural changes)INCLUDING PLUMBING AND ELECTRICAL., Replace drywall (no new walls added) for single family dwellings and duplexes only. AND Re-roof with Class A or B material weighing less than 6 pounds per sq. ft. over existing solid sheathing___16___Squares. Class A roof covering is required within Very High Fire Hazard SeverityZone(VHFHSZ).For residential roof replacement>50% of the total roof area, apply Cool Roof Product labeled andcertified byCool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title24, Part6, Section 141(b) 2B.

Re-roof with Class A or B roof covering material weighing less than 6 pounds per sq. ft. over new solid sheathing 24 Squares. Class A roof covering is required within Very High Fire Hazard Severity Zone (VHFHSZ). For residential roof replacement > 50% of the total roof area, apply Cool Roof Product labeled and certified by Cool Roof Rating Council (CRRC). Cool Roof may be required for non-residential buildings per Title 24, Part 6, Section 141.0(b)2B.